Within Search :
No. Tenders ID & Tenders Brief
1 Tenders: 26088665 Tender For Femoral Component Cobalt Chromium (Cocr) Alloy.
Refer Detail
Due Date : 21/09/2021
ORISSA
2 Tenders: 26087727 Tender For Aluminium Chequred Sheet For Door Passage. Size: 3000 Mm X 880 Mm X 2.03Mm. Thickness. (Height Of Elevated Ridges Is Not Included). Specn: Rdso Spec.No C 8217 ( Revision 1) Or Latest.
Refer Detail
Due Date : 30/09/2021
ASSAM
3 Tenders: 26085279 Manufactured And Supply Of Prefabricated Ojl Shelter Of Size 18.30M X 9.08M. The Stores As Per List Attached As Appx ‘A’ To Include The Following : (A) 04 X Living Area Of Size 4.498M X 7.128M Each. (B) 04 Nos Toilet Cum Bathroom Of Size 2.908 X 2.04M With Height Of 2.15M Attached With Each Living Room Having Common Partition Wall. (C) Verandah. 18.30M X 1.83M Covered Glazed Verandah With Polycarbonate Sheet (Transparent) Upto Column Ht Of 2.10M At The Cantilever End All Along The Length Of Living Area 0.9M Puff Panel Cladding Above Ffl. (D) 06 X Steel Truss Span Not Less Than 9.08M As Per Drawing. (E) 12 X Aluminium Door Including Frame And Shutter And All Necessary Fittings. (F) 10 X Aluminium Window Including Frame And 02 Nos Sliding Shutter And 01 No Wire Mesh Shutter With Each Window. (G) Puf Pannels All Around Shelter Made Of 0.63Mm Thick Pre Coated Gi Skin Outer Walls Filled With Puf Thickness 58.74Mm. (H) Pre Painted Galvanium Sheet 0.63Mm Thick Including Ridge Cover For Roofing. (J) Gypsum Board False Ceiling Panels Of Size 600Mm X 600Mm Each Including Alumn Snap Grid And Tying Wire. (K) 450Mm Wide Sunshade Of Galvanium Sheet Incl Suitable Iron Bracket. Job 2 2. Design Data (Living Room). (A) Length 18.30 Mtr.(Out To Out Measurement Of Puf Panel Walls). (B) Width 7.25 Mtr. (Out To Out Measurement Of Puf Panel Walls). (C) Height 2.70 Mtr(Clear Headroom Upto False Roof). (D) All Dimention Shown At Drg Sheet No 01. 3. Structural Members. (A) Columns, Trusses And Purlins. All Columns, Trusses And Purlins Will Be Made Of Rectangular/Square Hollow Tube Section Conforming To Is 4923 And Structural Steel Shall Conform To Is 2062. Thickness Of Cleats To Truss Should Be Minimum 6Mm. Six Trusses Will Be Provided Fabricated In Two Modular Inter Connectable Parts. The Verandah Should Be Provided With Truss Supported By The Main Columns And Verandah Columns. Each Main Column Shall Have Base Plate Of Size 300Mm X 200Mm X 10Mm With Four Holes For Fixing Foundation Bolts With Nuts And Top Sleeve Plate Of Size 250Mm X 250Mm X 8Mm With Predrilled Holes Of Appropriate Sizes For Fixing With The Truss. Each Truss Shall Have Appropriate Plate Of Size 250Mm X 250Mm X 8Mm With Predrilled Holes Of Appropriate Sizes For Fixing The Truss With The Main Column. All The Members Like Trusses, Purlins And Columns Will Be Fixed With 10Mm Dia And 150Mm Long Nuts And Bolts, . Make: Sail/Tata/Lloyd /Jindal/Bhushan Having Isi Mark Make And Conforming To Given Is Specifications. Bounded To The Polyurethane Foam. The Pre Coated Gi Sheet Should Conform To Is 14246 1995 With Manufacturer Test Certificates Conforming To Specification. Base Metal Of Gi Skinned Crca Sheet Should Be As Per Is 513 And Galvanization As Per Gr 120 As Per Is 277. (B) Base Plate And Foundation Bolts. (I) Base Plate At Foundation. Size 300Mm X 200Mm X 20Mm Thick With Holes For Foundation Bolts. (Ii) Foundation Bolts. Size 16Mm(Dia) X 450Mm(Long), Four Numbers For Each Foundation. The Bolts Must Be Made From High Tensile Steel Rod And Minimum Length Of Threads Should Be 100Mm. Each Foundation Bolt Will Be Provided With Ms Anchor Plate Of Size 50Mm X 50Mm X 6Mm Thick Welded At Bottom Of Foundation Bolts. Each Bolt Will Be Provided With Two Nos Of Suitable Washers And Nuts, Made Of High Tensile Steel. 4. Foundation Of Column. (A) Pcc 1:2:4 Type B1 (20 Mm Graded Stone Aggregate) Of Size 350Mm X 350Mm X 900Mm Over The Sub Base Pcc 1:5:10 Of Size 500Mm X 500Mm, 150Mm Thick. Four Nos Of Foundation Bolts 450Mm Long, 16Mm Dia And 100Mm Thread At Top With Nuts And Washers For Each Column Will Be Provided. Details Are Given As Per Drg. (B) Foundation Of Dwarf Wall Brick Masonary Wall In Cm 1:6 Of Size 345Mm Width And Under Gl 450Mm Depth And Above Gl 450Mm Over Pcc 1:5:10 E2 (40Mm Graded Aggregate) Of Size 450Mm Width And 150Mm Thick
Refer Detail
Due Date : 08/10/2021
MULTI STATE
4 Tenders: 26085147 Supply Of 1 White Paint 2 Distemper White 3 Thinner 4 Paint Brush 4" 5 Paint Brush 2" 6 Wire Brush 7 Flat File 10'' Rough 8 Hexa Blade Double Edge, 25 Mm 9 Hammer 1Kg. 10 Hammer 5 Kg 11 Hinges 3" 12 Hinges 2 13 M.S Tower Bolt 150Mm 14 Al Sliding Bolt 16*300Mm 15 Nails 2" 16 Nails 3'' 17 Nails 4'' 18 Wooden Screw 1.5"/35X8 19 Wooden Screw 2 " 20 Al Handle 125Mm 21 Ms Handle [ 100 Mm Or 150Mm] 22 G.I. Bend ½ Isi Make, 90 Degree 23 G.I. Bend 1'' 24 Gi Bend For 2" Dia Pipe 25 G.I Bend 5'' 26 G.I.Elbow 1/2'' 27 G.I.Elbow 1'' 28 G.I.Nipple 1/2X4 29 Gi Tee 1/2 X 1/2 30 Gi Tee 25 X 15Mm 31 Gate Valve 1" (Brass) 32 Gate Valve Brass 1/2'' 33 Floating Valve For Sintex Use Isi 15Mm 34 Non Return Valve 3 35 Gi Pipe (15Mm Dia ), 6 M Length 36 Gi Pipe 25Mm Dia (6Mtr. Length) 37 G.I.Pipe 50Mm Dia 6 Mtr Length 38 G.I Pipe 5'' (6 Mtr Length) 39 Gi Flange 100 Mm Dia ( Heavy Duty ) 40 Gi Flange 125 Mm Dia ( Heavy Duty ) 41 Pipe Wrench 12'' (300 Mm) 42 Pipe Wrench 14'' 43 Heavy Duty Pipe Wrench 18 Inch 44 Heavy Duty Pipe Wrench 24 Inch 45 Chain Wrench 36'' 46 Teflon Tape. 47 M Seal 100 Gram (Repair Putty) 48 Wash Basin 49 Steel Sink 50 C.P. Bib Cock 51 Pvc Bib Cock 1/2" 52 Cp Piller Cock 1/2 53 Cp Angle Valve 15Mm 54 Pvc Coupling 32Mm 55 Pvc Waste Pipe 56 Cp Brass Stop Cock 1/2 57 Pvc Connection Pipe 58 Health Faucet 59 Wc Pan ( European ) Type 60 Wc Pan (Indian Type) 61 Pvc Low Level Cistern 10 Ltr. Capacity Isi Make 62 Drill Bit For (Wall/Tiles) 63 Die Set 64 Pliers 65 Axe Big (Kulhari) 66 Pickaxes (Gaiti) 67 Spade (Phawda) 68 Belcha With Handle (Showel) 69 Kudal (Hoe) 70 Hand Saw (Tree Cutter) 71 Water Suction Rubber Pipe 4 " (100 Mm) 72 Water Suction Rubber Pipe 5'' (125 Mm) 73 Foot Valve 4'' (100Mm) 74 Foot Valve 5'' (125Mm) 75 Bearing Skf 3307 Atn9 76 Grease Gun Nipple Bottom Type 77 Gland Packing 10Mm 78 M S Welding Electrode 2.5 Mm 79 M S Welding Electrode 3.15 Sq.Mm 80 Welding Gloves 81 Gi Wire Mesh (Mosquito Net) 82 Wall Putty (1 Kg Pack) 83 White Cement (1 Kg Pack) 84 Doctor Fixit
Refer Detail
Due Date : 04/10/2021
MANIPUR
5 Tenders: 26083175 Renovation Of Hassan Chemical Lab,Plumbing,Aluminium Partition With Door Construction Of Concrete Partition Wal With Plstering And Painting, Granite Platform Having Sinks And Drawers For Storage, Construction Of Lab Waste Water Storage Tank.
Refer Detail
Due Date : 27/09/2021
KARNATAKA
6 Tenders: 26082681 Annual Maintenance Of Water Supply Scheme In Pla , Hisar Repair Of Water Supply Leakage Including Excavation And Refilling The Trench Providing And Fixing Cid Joints Pvc Pipe Pig Lead And Spun Yarn Complete In All Respect And All Other Works Continge Civil Works.
Refer Detail
Due Date : 27/09/2021
HARYANA
7 Tenders: 26082653 Annual Maintenance Of Main Water Works, Tosham Road Hisar Repair Of Water Supply Leakage Of Rising Main Including Excavation And Refilling Of Trench Supply And Erection Of Pig Lead Spun Yarn And Replacement Of Consumable Items At Main Water Works Tos Civil Works.
Refer Detail
Due Date : 27/09/2021
HARYANA
8 Tenders: 26082151 Rate Contract For Supply Of Aluminium Dish Ends With Fim From Iocl At Bg Cryogenics Iocl Nashik Mechanical All.
Refer Detail
Due Date : 12/10/2021
MAHARASHTRA
9 Tenders: 26081954 Tender For Aluminium Brushing, Bright Finishing For General Purpose To Is:2339/1963 (Reaffirmed 2009) Packing In 4 Ltrs Duel Container (Alluminium Paste Packed In Polyurethane Bags And Dipped In 4 Ltr Containers) .
Refer Detail
Due Date : 24/09/2021
MAHARASHTRA
10 Tenders: 26081696 Tender For Aluminium Strip Size 3660 X 38 X 2Mm To Is: 737/2008, Grade 51000B H X 4.
Refer Detail
Due Date : 18/10/2021
MULTI STATE
Show Page: 1 2 3 4 5 6 7 8 9 10 ...   Show:

NonFerrous Metals Tenders

Tenders information of NonFerrous Metals Tenders in India and Indian tenders for NonFerrous Metals , Tender document For NonFerrous Metals , NonFerrous Metals tenders, NonFerrous Metals Tender information, Live Tender for NonFerrous Metals , Closed Tender for NonFerrous Metals , Free Tender for NonFerrous Metals , Free Full Tender Details for NonFerrous Metals . Live Chat Available for tenders information.