Within Search :
No. Tenders ID & Tenders Brief
1 Tenders: 24352288 Supply Of 238 Number Of Two Tier Steel Cot For The Bc, Mbc Hostels Situated In Dharmapuri
Refer Detail
Due Date : 05/02/2021
TAMIL NADU
2 Tenders: 24316988 Supply Of Cots Items For Mfr Of Iwts Wireless Sml Qty 02 Nos Reqd For Mceme And Cme Pune Miscellaneous Goods.
Refer Detail
Due Date : 04/02/2021
KARNATAKA
3 Tenders: 24311572 Supply Of Cot For Old Age People Sc(S036/21), Cot For Old Age People General (S034/21) Equipments.
Refer Detail
Due Date : 08/02/2021
KERALA
4 Tenders: 24284643 Supply Of Steel Folding Cot (As Per Drawing).
Refer Detail
Due Date : 28/01/2021
CHHATTISGARH
5 Tenders: 24280850 Supply Of 150 Number Of Two Tier Steel Cot For The Bc, Mbc Hostels Situated In Perambalur District 2020 2021
Refer Detail
Due Date : 25/01/2021
TAMIL NADU
6 Tenders: 24275862 Supply Of Steel Folding Cot (As Per Drawing).
Refer Detail
Due Date : 27/01/2021
JAMMU AND KASHMIR
7 Tenders: 24262723 Tender For Iron Cot Single Bed As Per Enclosed Drawing No. Rso/Ckp/2018/01 Annexure I To This Tender.
Refer Detail
Due Date : 01/02/2021
JHARKHAND
8 Tenders: 24254799 Supply Of Steel Folding Cot (As Per Drawing).
Refer Detail
Due Date : 28/01/2021
RAJASTHAN
9 Tenders: 24254768 Supply Of Steel Folding Cot (As Per Drawing).
Refer Detail
Due Date : 28/01/2021
RAJASTHAN
10 Tenders: 24213909 E Tender For Procurement Of Rates General Tender Non Rate Contract Items Of Sidco 1 Wooden Furniture [ Sl.No.1 17] Compact Dual Desk And Bench With Wooden Top Back Rest And Shelf.Size:1800X900x750mm Seat 300Mm,Desk Width 400Mm 2 Hard Wood "L" Shape Officers Table. Two Drawer One Cupboard And C P U Provision ,Wrighting Pad And Keyboard Provision With Front Full Covered Wooden Panel Size 1800X900x750mm 3 Hard Wood "L" Shape Executive Table.With Key Board Try Cpu Trolly With Drawer And Cupboard Of Size Main Table800x900x750mm Side Table With Cupbord 900X450x750/650Mm 4 Tw Mosquito Net Frames (Single Cot) 5 Tw Mosquito Net Frames (Double Cot) 6 Wooden Cot : 8 Mm Plywood Top Of Size 198 Cm Length, 90 Cm Width, Front Leg 60 Cm , Back Leg 50 Cm (Including Transportation Loading And Unloading ) 7 Study Table Wooden Frame With Laminated Board Shutter Using As Writing Board With Drawer And Bottom Shelves , Size 90X60cm 8 Tw Teapoy With Wooden Top/ 8Mm Glass Top With Bottom Shelf 90X60x45 Cm 9 Tw Foot Rest,Two Step With Side Covering Size 50X50x40 Cm 10 Tw Drawing Board ,Plank Thickness 2Cm With Sross Support.Size 125 X 90 Cm 11 Tw Drawing Board,Plank Thickness 2Cm With Sross Suport .Size 90X75 Cm 12 Tw Drawing Board, Plank Thickness 2Cm With Sross Support.Size 90 X 60 Cm 13 Tw Drawing Board, Plank Thickness 2Cm With Sross Suport . 80 X 60 Cm 14 Anjiliwood Baby Desk,Plank Thickness 2.2 Thicknesssize 150X60x35cm 15 Plain Table Made Of Hard Wood,Except Top Prelaminated Board 1500Mm Length X 600Mm Depth X 750Mmheight * Side Storage : 900Mm Length X 450Mm Depth X 750Mm Height ,2.5Cm Square Leg* Plain Tablemade Of Hard Wood,Except Top Prelaminated Board 1350Mm Length X 600Mm Depth X 750Mmheight * Side Storage : 900Mm Length X 450Mm Depth X 750Mm Height ,2.5 Cm Square Leg Plain Table Made Of Hard Wood,Except Top Prelaminated Board1200mm Length X 600Mm Depth X 750Mmheight 2.5 Leg* Table * One Drwaer And One Cupbord Considred * Steel Furniture [Sl.No.18 47] Steel Two Seated Swing 2100 X 1800X40 Mm Made With Gi Pipe 2”,14G And Sheet Foodtroiiy: Fully Ss 304 Size.950 X510 X 900 Mm,20 G Sheet,Pipe 1 ¼”,1” Frame,Two Open Shelves Side Rails,Dia 3”Whl With Break Stainiess Steei Food Troiiy With Auto Tyre With Leversize.1200X600x900mm Hospital Cot Fully Stainless Steel,Dia 1 ¼”Pipe Leg,Bed Frame 2” 14G,With Trip Stand Facilities,Side Railings3/4 X ½” Pipe Size. 190 X90 X 60Cm ( Using 304G. ) Hospital Cot: Stainless Steel Cot With Two Side Support Railsdia 1 ¼”Pipe Leg,Bed Frame 2” 14G,With Trip Stand Facilities,Side Railings3/4 X ½” Pipe Size. 190 X 90 X 60Cm ( Using 304G. ) Hospital Cot: Stainless Steel Cot,Dia 1 ¼”Pipe Leg,Bed Frame 2” 14G,With Trip Stand Facilities,Side Railings3/4 X ½” Pipe Using 202 Gr. With Rails Of Size. 190 X 90 X 60Cm Icu Cot With 4 Sections With Railing And Tidting Ss Bow Size. 200 X 90 X 60Cm (Without Railings) Semi Fowler Cot (2) Sections Full Sƒssize:90 X 200Cm Hospital Cot: Stainless Steel Cot With Both Side Support Railings 190X90x60 ( Using 304G. ) Hospital By Stander Cot Full Stainless Steel Size. 183 X60 X 46Cm ( Using 304G. ) Hospital Bed Side Locker Fully Ss, 20G Size.(83Cml*60Cmw*46Cmh) Hospital Examination Table. Fully Ss,20G Midle Two Support,Size 198Cml X60cmwx 90Cmh ( Using 304. ) Semi Fowler Cot Full Stainless Steel (3Section) Size. 190 X90 X 60Cm ( Using 304G. ) Stretcher And Trolly Side Railn With Oxygen Cylender Provision Size. 198X 56 X 76Cm ( Using 304G. ) Over Bed Table Full Stainless Steel Ss304 20G 106Cml*45*Cmw*91.5Cmh Baby Cradle With Stand Full Stainless Steel Size.91Cml X25cmw *30Cmh (Using 304G. ) Perforatory Chair 3 Seater Full Stainless Steel Size.160Cml X66cmw *460Cmh (Using 304G. )5Cm X 5Cm Sq Tube Or 7.5Cm X 3.75Cm Tube With Suitable Leg,Seat Fitted With Screw Fitting With Both End Handle Hospital Medicine Rack Five Shelves And Three Side Half Covering Size. 180 X 90 X40cm ( Using 304G. )Leg Size 4.5 X 4.5Cm 16 Shelves 20G Screw Fitted Box File Almirah With Central Partition And Double Shutter Using Cr Sheet 20G With 5 Shelves Size.198 X 99 X 50 Cm Steel Cot : 8 Mm Plywood Top Of Size 198 Cm Length, 90 Cm Width, Front Leg 60 Cm , Back Leg 50 Cm Side Frame 3 X 1 ½” Rectangle Pipe 18G,Leg 1 ½ Round Pipe Or 2 X 2” Sq Pipe 16G Steel Frame Bench 18 Mm Rubwood Top And 1 " Square Pipe Frame And Legs 18G , 180 X 30 X 45 H, Cm Steel Frame Desk 18 Mm Rub Wood Top And 1" Square Pipe Frame And Legs 18G , 180 X 40 X 75 Cm Steel Arm Less Chair Rub Wood Seat 1” Pipe Instrument Cabinet Full Stainless Steel Size.160Cml X66cmw *460Cmh (Using 304 20G. ) Steel Frame Baby Desk With Wooden Top 90X30x60cm Industrial Locker 6 Compartments(195X90x48cm 20G) Without Lock And Key Study Chair Steel Cushion( Steel ¾”Pipe 16G,Seat Cushion Size 40 X 35Cm Back Half Cushion Executive Table Size: 1800W X 800D X 750H 2 Lockable Drawers, Hafele Fittings One Side Metal Leg, 50Mm Mfc Sandwich Top Panel E1 Grade Credestal Size: 900 X 450 X 750 2 Lockable Drawers + 1 Mfc Shutters With Hettich Hydraulic Soft Close Hinges Fixed/Adjustable Inner Shelves 25Mm And 18Mm Combined Green Certified Mfc Fabrication Medium Tpe Table Size: 1600W X 800D X 750H 50Mm Thick Mfc Sandwich Panels Top Panel Laminate With Iron Grey + Walnut As Indicative Image Partition Works[ Sl.No.48 79] Supply And Installation Of Aluminum Partition: Consisting Of Aluminum Sections 63.5 Mm X 38.1 Mm X 1.0 Mm Thick Hollow Anodized Of Jindal / Hindalco Make Conforming To Is733 And Is 1285. The Anodizing Shall Be Transparent And Complying Is 1868 (Minimum Anodic Coating Of Grade Ac 15). The Sections Would Be Installed At An Interval Of 3’6” Vertically And Bottom Section Of Size 63.5 Mm X 38.1 Mm X 1.0 Mm Aluminium Snap Beading For Glazing/Panelling Etc. And 5 Mm Thick Float Transparent Glass/Mesh Including Providing Screw Less Aluminium Glazing Clip. Bottom Up To 3’ Ht Will Be Provided With 8 Mm Thick Both Side Pre Laminated Particle Board Flat Pressed 3 Layer Conforming To Is12823 Grade I Type Ii Of Of Interior Grade Complete With Fixing Clips, Fasteners, Filling Up Of Gaps At Junction, Top, Bottom, And Sides With Required Pvc/Neoprene Felt Etc.. The Joints Shall Be Smooth, Mitred And Jointed With Cleat Angle Etc Ceiling With Pvc Pannel (Ever Last)Rate For 1M² :Providing False Ceiling Using Pvc Panel 30Cm Wide And 3.66M Long (12Ft.) Over 20 X 20Mm Aluminium Tube Hanged On To Roof Slab Or Members, With Gi Wire Or Aluminium Glazing Clips, And Providing Pvc Decoration Corners, And Pvc H Section For Extending The Length Etc..... Including Necessary Screws, Labour Charges Etc.. Complete Wall Panneling With Hard Wooden Pannel Rate For1m² : Panneling Wall Using Mahagony Wooden Pannel Of Size Between 20 Cm And 25 Cm Wide And 15Mm Thick, Over Hard Wood Or Anjili Wood Reapers Spaced At 50Cm C/C And Fixed To Walls By Fiber Plug And Screws And Decoratively Designed Pannels, Fixed Over Reepers All Ready Fixed Using, Star Screws Etc... And Polishing With Best Quality Polish Two Coats Including All Cost And Labour Charge Etc.. Office Wall Rack Mdf Rate For1m² : Settingup Of Office Wall Rack By Using Good Quality 18Mm Both Side Prelaminated Mdf And 15Mm Both Side Prelaminated Mdf With Doors, Including Steel Handle ,Multi Lock And Auto Hinges Etc Complete Office Wall Rack Mdf Paint Rate For1m²: Settingup Of Office Wall Rack By Using Good Quality 18Mm Mdf And 15Mm Mdf With Inside And Out Side Painted Finish With Door Including , Steel Handle ,Multi Lock And Auto Hinges Etc Complete Office Cupboard Ply Wood Rate For1m² :Settingup Of Office Cupboard By Using Good Quality 18Mm Plywood And 15Mm Marine Plywood With 1Mm Mica And Inside Painted Finish With Door Including , Steel Handle ,Multi Lock And Auto Hinges Etc Complte Office Cupboard Rubwood Rate For1m²:Settingup Of Office Cupboard By Using Good Quality 18Mm Rubwood And 15Mm Rubwood And Polished Finish With Door Including , Steel Handle ,Multi Lock And Auto Hinges Etc Complte Office Cupboard Mdf Rate For1m² :Settingup Of Office Cupboard By Using Good Quality 18Mm Both Side Prelaminated Mdf And 15Mm Both Side Prelaminated Mdf With Doors, Including Steel Handle ,Multi Lock And Auto Hinges Etc Complete Cubicle Work Rate For 1 M² : Cubicle Office Table By Using Good Quality 18Mm Rubwood Including Drawer And Cupboard , With Sliding Keyboard , File Manager , Steel Handle ,Provision For Cpuƒups With Lock And Key Partition Wall With Door By Using Good Quality Rubwood 18Mm Rate For 1 M² :Office Partition Wall With Door By Using Good Quality 18Mm Rubwood,15Mm Rubwood And 12Mm Marine Rubwood With 1Mm Mica, 12Mm Glass And Inside Painted Finish, With Drawer And Cupboard , With Sliding Keyboard , File Manager , Steel Handle ,Provision For Cpuƒups With Lock And Key Steel Terrus Protection Work For Corrugated Gi Sheet Rate For 1 M² Kitchen Cupboard Below Working Table Rate For1m² :Providing Kitchen Cupboard Below The Working Table, Having Height 60 Cm Using Aliuminium Plain Tube, Cleat Angle Syntex Door Set And Necessary Other Furniture Fittings Etc.. Including All Cost , Labour Charges Etc.. Curtain Using Wooden Blinds With 35Mm Wide Wooden Venetians Rate For1m² Office Cupboard Rate For1m²:Settingup Of Office Cupboard By Using Good Quality 18Mm Mdf And 15Mm Mdf With Inside And Out Side Painted Finish With Door Including , Steel Handle ,Multi Lock And Auto Hinges Etc Complete Executive Table Plywood Rate For1m² :Using Good Quality 18Mm Plywood,15Mm Plywood And 12Mm Marine Plywood With 1Mm Mica And Inside Painted Finish, With Drawer And Cupboard , With Sliding Keyboard , File Manager , Steel Handle ,Provision For Cpuƒups With Lock And Key Executive Table Rubwood Rate For1m² :By Using Good Quality 18Mm Rubwood,15Mm Rubwood And 12Mm Rubwood And Polish Finish, Including Drawer And Cupboard , With Sliding Keyboard , File Manager , Steel Handle ,Provision For Cpuƒups With Lock And Key Executive Table Particle Board Rate For1m² :By Using Good Quality Laminated 18Mm Particle Board, Including Drawer And Cupboard , With Sliding Keyboard , File Manager , Steel Handle ,Provision For Cpuƒups With Lock And Key Of Size 1.125 M2 Rate Executive Table Particle Board Rate For1m² : By Using Good Quality Laminated 25Mm Particle Board, Including Drawer And Cupboard , With Sliding Keyboard , File Manager , Steel Handle ,Provision For Cpuƒups With Lock And Key Of Office Wall Rack Plywood Rate For1m²:Settingup Of Office Wall Rack By Using Good Quality 18Mm Plywood And 15Mm Marine Plywood With 1Mm Mica And Inside Painted Finish With Door Including , Steel Handle ,Multi Lock And Auto Hinges Etc Complte Office Wall Rack Rubwood Rate For1m² : By Using Good Quality 18Mm Rubwood And 15Mm Rubwood And Polished Finish With Door Including , Steel Handle ,Multi Lock And Auto Hinges Etc Complte Modular Partition 1 Sm : 60/75Mm Width 80 Microns Powder Coated Crca Partitions With Pre Punched Cutouts To Run Electric And Networking Cables. Duel Race Ways With Punch Out To Fix Electrical And Data Modules For Power And Data At Skirting Level And Just Below Table Top, Writing Board(White Board), Pin Up Board(Soft Board). Partitons Are Covered With 9Mm Tiles(Prelaminated Particle Board/Mdf/Fabric Cladded Board) As Required By Using Sliding Panel Method, Level Adjusters And All The Visible Edges Are Covered With Curved Aluminum Trims. Table Top For Work Stations: Supplying And Fixing Table Tops Made Of 25Mm Thick Prelaminated Board, Exposed Edges Are Coverd With 2Mm Thick Pvc Edgeband And Other Edge With 0.5Mm Applied With Hot Melt Glue. The Table Tops Are Supported Partition With The Help Of Steel Cantilevers, Gromet For Wire Management Etc. Gable Ends For Work Stations : Supplying And Installing Gable Ends Made Of 25Mm Prleminated Particle Board Of Desired Shade, Screwed To Worktop With Help Of Right Angle Block. Hardwares Like Level Adjusters, Z Braket, Right Angle Block Are Tobe Used Where Ever Required Drawer Units For Work Stations : Supplying And Fixing Drawer Unit Made Of 18Mm Thick Prelaminated Particle Board. Small Drawer Pullouts And 1 File Cabinet, Centre Locking System, Bottom Mounted Sliders For Drawer Pullouts. (Ebco/Equivalent), With Lockable Castors. Etc Keyboard Trays For Work Stations : Supplying And Installing Keyboard Trays Made Of Hip High Impact Plastic And Mounted Under The Worktop With Telescopic Sliding Channels Cpu Trolleys For Work Stations : Supplying And Installing Cpu Trolleys Made Of Powder Coated Ms Sheet With Adjustable Width, Front And Back Open And Provided With 4 Lockable Castors To Ease Out The Wire Accessibility From The Cpu Gypsum Board Ceiling : Providing And Fixing Gypsum Board Gybroc Or Equalant) Fall Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, And Galvanized With Zinc Coating And Consisting Angle Cleatswith Flanges Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of Required Length With Nuts And Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels Running Centre To Centre, To Which The Ceiling Section With Tapered Flanges Having Lips Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips G.I. Wire At Every Junction, Including Fixing Perimeter , The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At Centre, With Drywall Screws Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Drywall Screws Of Size, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes ,Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed. Without Painting Gypsum Board Ceiling : Providing And Fixing Gypsum Board(Gybroc Or Equalant) Fall Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, And Galvanized With Zinc Coating And Consisting Of Angle Cleatswith Flanges Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of Required Length With Nuts And Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels Running Centre To Centre, To Which The Ceiling Section With Tapered Flanges Having Lips Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips G.I. Wire At Every Junction, Including Fixing Perimeter , The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At Centre, With Drywall Screws Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Drywall Screws Of Size, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes ,Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed. With Painting Curtain Rate For1m² : Vertical Blind Curtain Using Toughened Synthetic Cloth Having 100Mm Width With All Fitting For Operations Cloth Curtain Rate For1m² Zeebra Blinds Rate For1m² Curtain Using Aluminium Venetian Blindes : Curtain Using Aluminium Venetion Blade (Various Colours) Of Size 25Mm Wide Supply And Installation Of 12 Mtr High Mast System With 6 Nos. Of 180W Led Lights [Sl.No.80 114] (A) Supply 12Mtr High Mast System With Its Accessories . Mast Shaft Shall Be In One Or Two Section, Galvanisation Of Single Hot Dipped, Suitable For Wind Velocity As Per Is 875, Head Frame Assembly 2Point Suspention System With Steel Wire Rope 5Mm Dia (7/19 Construction) And Double Drum Winching System Arrangement Conforming To Is With Galvanised Lantern Carriage Suitable For Accommodating 6Nos Flood Light Luminaires Symmetrically And Its Control Gear Box And Lightining Spike. The Mast Shall Have An Integral 3 Phase Operation Power Tool Installed Inside The Base Compartment For Its Operation.,(B Supply And Conveyance Foundation Bolt Made Of Special Steel Along With Nuts, Washers, Anchor Plates And Templates. Supply, Errection, Testing And Commissioning Of Led Aviation Obstruction Light. (D) Supply And Errection Control Box Consists Of :6 25A 4Pole Mcb Incomer, 25A 4Pole Rccb, Single Dial 24 Hour Timer With Charging Facility And Contactor For Automatic Operation, And Suitable Size Conection Cable From Control Panel To Flood Light Fittings . It Shall Also Consists Of Suitable Control For Power Tool Three Phase Motor And Giving Connection Supply,Installation,Testing And Commissioning Of 200W Led Flood Light Luminair With Extruded Aluminium Heat Sink Pressure Die Cast Aluminium Cover On Both Side For Holding Of Extruded Aluminium Heat Sink And With Voltage Range ( 140 270V Ac). The Luminair Shall Be Minimum Ip 66 Protected. Led Driver Efficiency Should Be Greater Than 105 % With Colour Temperature Should Be Greater Than 5700K Range. Inbuilt Surge Protection 10Kv And Power Factor 0.95 With Thd Less Than 10%. Supply And Laying Of One Number Pvc Insulated And Pvc Sheathed Armouredaluminium Power Cable Of 1.1Kv Grade Of The 4 Core 6 Sq Mm Sizes In The Existing Rcc/ Hume / Stone Ware/ Gi/ Dwc Pipe As Required. Supply Andlaying Of One No. Pvc Insulated And Pvc Sheathed Armouredaluminium Power Cable Of 1.1 Kv Grade Of The Following Sizes In The Existing Masonry Open Duct As Required.4 Core 6 Sq Mm Supply And Laying Of Dwc Pipe In Ordinary Soil 0.75M Below Ground Level Including Excavation 50 / 38 Mm Or Nearest Size Supplying Siemens / Tropodur Type Nickel Plated Single Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armouredaluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For 2/ 3/ 3½/ 4 Core Cable Of The 6 Sq Mm Sizes As Required. Supplying And Providing Earth Clamps For Siemens/ Tropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The 6 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip Sizes Of Cables As Required. Supply Of Superior Quality Aluminium Tubular Cable Socket And Making Core Termination Of Cables Of The 6 Sq Mm Sizes Including Crimping Etc. As Required Supply And Providing Plate Earthing As Per Is 3043 With 600X600x6.30 Mm Gi/Ci Earth Plate, 20 Mm Gi Watering Pipe Fixed To The Earth Plate With 20 X 3 Mm Gi Clamps, Gi Funnel With Weld Mesh, Filling Required Quantity Of Charcoal Including Construction Of Inspection Chamber With A Bed Concrete Of 1:4:8 Pcc Using 40 Mm Broken Stone (10 Cm Thick), Brick Work In Cement Mortar 1:6, Plastering The Surface Of Brick Masonry And The Exposed Surface Of Pcc Bed With Cement Mortar 1:4, 12 Mm Thick, The Finished Inside Dimension Shall Be 300 X 300 X 300 Mm) But Excluding Test Joint, Earth Continuity Conductor To The Plate, And Covering At The Top. (In Hard Soil) Supply And Providing The 300 X 300 X 6 Mm Cast Iron Gully Trap With Covering Sizes Of Cast Iron Gully Trap With Covering At The Top Of Of The Inspection Chamber Of Earth Pit As Required Supply And Providing Test Joint For The Earthing System Using 2 Nos Of The 2 X 25 X 3 Mm Gi Strip Sizes Of Strips Including Cutting And Bending To Shape, Drilling Necessary Holes And Fixed To The Watering Pipe Etc As Required. Supply And Providing Earth Lead From The Test Joint To The Earth Electrode Using The 25 X 3 Mm Gi Strip Sizes Of Conductors/ Strips Including Cutting, Drilling Necessary Holes (In Case Of Strip) And Fixing Firmly With Plate Test Joint Etc As Required. Supply And Drawing Bare Earthing Conductors Of The 3.15 Mm Copper Conductor (10 Swg) Sizes Along With Wiring/ Cables And Giving Connection As Required Do 2.65 Mm Copper Conductor (12 Swg) Supply Of Superior Quality Copper Earth Socket For The 3.15 Mm (10 Swg)Sizes Of Earth Conductor Including Crimping Etc. As Required. Supply And Laying The 25 X 3 Mm Gi Strip Sizes Of Strips Laid 0.60 M Below Ground Level Including Excavating Trench Of Suitable Size And Refilling Etc. As Required (In Ordinary Soil). Supply And Laying Strips Of The 25 X 3 Mm Gi Strip Sizes Along With Wiring/ Cables And Giving Connection As Required. Supply And Providing The 25 X 6 Mm Gi Bolt And Nut Sizes Of Bolt And Nut With Washers On The Existing Ms Box / Earth Bus Etc. As Required Including Drilling Necessary Holes As Required Do 25 X 8 Mm Gi Bolt And Nut Supply And Wiring With 4.00 Sq Mm Single Run Without Sockets. 650/1100 V Grade Pvc Insulated Stranded Single Core Copper Conductor Cables Conforming To Is 694 Part I 1990 For Interconnecting The Control Devices/ Equipments Including Providing Suitable Size Sockets At The Termination Points, Keeping The Wiring Firm By Suitable Tie/ Tie Mounts/ Pvc Duct Etc As Required Aluminium Anodised Danger Notice Board Of Size 150 X 100 Mm. With Inscriptions ( Both In English And Malayalam) And Conventional Skull And Bone In Red Colour. Supply And Clamping The Following Sizes Of "B" Class Gi Pipe On Wall With All Required Accessories And Clamps Etc., Including Cutting And Making Good The Walls, Painting The Exposed Portions Etc., As Protective Covering To Earth Leads / Cables. 40 Mm Dia (For Service Brick Work In Cement Mortar 1:6 With Country Burnt Bricks 19Cm X 9Cm X 9Cm For Foundation And Basement. Plain Cement Concrete 1:4:8 Using 40Mm ( Normal Size ) Broken Stone. ( M3 ) Plastering With Cement Mortar 1:4, 12Mm Thick One Coat Fabrication, Supply And Installation Of Dust And Vermin Proof, Wall Mounting, Thermoplastic Meter Box Of Folowing Size Suitable For Fixing Kseb Meter,Fuse Units, Ct Etc, Hinged Door Construction For The Front Side With Compartments If Necessary, Providing Vision Panel For The Meter Compartment, Knock Out For Cable Entry And Exit. 600X300x214mm 300X300x170mm Fabrication, Supply, Conveyance And Installation Of Angle Iron Frame Work For Wall Mounting Panel Board Using Suitable Size Angle Iron Cut And Welded To Shape Including Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Zinc Chromate Primer, Bolting The Frame To The Panel Using Required Bolts And Nuts, Fixing The Whole To The Wall, Making Good The Damagesetc As Required. Supply And Providing 32 A, 415 V Backelite Fuse Fitting 16 A, Clip On Offset Tag Fuse Link Of Size F1 32 A, 415 V, 2 Way Neutral Link Mounted On Dmc/ Smc Base. A To 25 A, 10 Ka, 4 Pole Mcb (C Curve) Fabrication ,Supply And Conveyance And Installation Of Name Board Carrying The Inscription "Mplad Works" Indicating The Cost Involved, The Commencement, Completion And Inauguration Date The Name Of Mp Sponsoring The Project And Name Of The Institution Should Be Permanantly And Prominently, Erected By Using Required Bolt Nad Nuts As Required. ( Actual Amount Paid On Production Of Recipt) Kseb Charges ( Actual Amount Paid On Production Of Recipt) Supply And Installation Of 10M High Mast With 6 Nos. 180W Led Light [Sl.No.115 147] Supply And Installation Of High Mast System As Per Following Including Foundation Specification (A) Supply 10Mtr High Mast System With Its Accessories . Mast Shaft Shall Be In Single Or Two Section, Galvanisation Of Single Hot Dipped, Suitable For Wind Velocity As Per Is 875 Head Frame Assembly 2 Point Suspention System With Steel Wire Rope 5/6 Mm Dia (7119 Construction) And Double Drum Winching System Arrangement Conforming To Is With Galvanised Lantern Carriage Suitable For Accommodating 6Nos Flood Light Luminaires Symmetrically Andlightining Spike. (B) Supply And Conveyance 4/6 Nos Foundation Bolt Made Of Special Steel Along With Nuts, Washers, Anchor Plates And Templates Including Foundation A) Construction Of Suitable Shallow Foundation With L:2:4 Concrete For The High Mast Considering The Safe Soil Bearing Capacity At Site As 10 T/Sqmtr With Reiforcement For Rcc Works, Bend Tied And Placed In Position (Plain Grill Requiring Bend Cold ) Using For Steel Including Form ,Work For Reinforcedcement Concrete And Excavation Of Soil Including Neat Banking. Footting Size :1200*1200*200 And Column Size 650*650*900 B)Erecrion And Commissioning Of The Above High Mast With The Help Ofcrane/Derrick And Other Suitable Equipment And Wiring Of Luminaries With Wiring Materials Supply And Erection Control Box Consists Of 1 No. 25A, 2 Pole Mcb Incomer, Single Dial 24 Hour Timer With Charging Facility And Suitable Contractor For Automatic Operation, Suitable Size Connection Cable From Control Panel To Flood Light Fittings. Supply, Installation, Testing And Commissioning Of 180W Led Flood Light Luminaire With Extruded Aluminium Heat Sink Pressure Die Cast Aluminium Cover On Both Side For Holding Of Extruded Aluminium Heat Sink And With Voltage Range ( L40 270 Ac). The Luminaire Shall Be Minimum Ip 66 Protected. 105 Lm/W. Led Driver Efficiency Should Be Greater Than 105 %O With Colour Temperature Should Be Greater Than 5700K Range. Inbuilt Surge Protection 10Kv And Power Factor 0.95 With Thd Less Than L0%. (Mr) Fabrication Of Fully Partitioned, Dust And Vermin Proof Enclosure For Panel Assembly As Per Form 4 Of Is 8623 (With Latest Amendments) Using 1.60 Mm Crca Sheet As Per Approved Design And Requirement. Wiithfrotr And Rear Access Facility. Bus Bar Chambers. Hinged Doors Ror All Switch Gear Compartments, Earthing The Doors Using 4 Sq Mm Braided Copper Conductor, Providing Necessary Cut_Outs For Mounting Meters, Relays, Indication Lamps, Bus Bar Interconnection At", Detachable Covers For Bus Bar Chamber And Cable Aley, Painting The Assembly With 2 Coats Synthetic Enamel Paint Over A Coat Of Zinc Chromate Primer Etc As Required. Crca Sheet Alone Be Used For The Fabrication. Angles/ Flats/ Slotted Angles Etc Shall Not Be Used For The Fabrication Of Panel Assembly. The Measurments Should Be Taken The Area Of The Complete Sheets Used For Panel Board Including Partitions, Folding, Shrouding Etc. Including Control Wiring Supply And Fixing The Following Types Of Beeding Along The Periphery Of Doors/ Other Detachable Comparrments To Make The Panel Assembly Dust And Vermin Proof Including Sticking With Glue A' Section Neoprene Beeding Suitable For 1.60/ 2.00 Mm Sheet Fabrication, Supply, Conveyance And Installation Of Angle Iron Frame Work For Wall Mounting Panel Board Using Suitable Size Angle Iron Cut And Welded To Shape Including Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Zinc Chromate Primer, Bolting The Frame To The Panel Using Required Bolt And Nuts, Fixing The Whole To The Wall, Making Good The Damages Etc. As Required. Supply And Fixing The Following Accessories In The Existing Meter Board And Giving Connections Etc. [8 10] 32 A,415 V Backelite Fuse Fitting 32 A,415 V,2 Way Neutral Link Mounted On Dmc/ Smc Base. 20 32 A, Clip On Offset Tag Fuse Link Of Size Fl Supply And Installation Of The Following Accessories Suitable For 50 Hz , Ac Supply Conforming To Is 8828 1995/ Iec 60898 Of The Following Current Ratings In The Existing Enclosure And Giving Connections As Required 25 A,2 Pole, 30 Ma Rccb 6 Ato25 A, L0 Ka, Dp Mcb (C Curve) 32A,2Pole, Ac I Rated Power Contractor With Lno+Lnc Auxiliary Contracts And With Ac Coil 24 Hours Timer For Operating Automatic On Off Function Aluminiumanodiseddangernotice Board Of Size 150 X 100 Mm. With Inscriptions (Both In English And Malayalam) And Conventional Skull And Bone In Red Colour. Supply And Wiring With 650/1100 V Grade Pvc Insulated Stranded Single Core Copper Conductor Cables Conforming To Is 694 Part I 1990 For Interconnecting The Control Devices/ Equipments Including Providing Suitable Size Sockets At The Termination Points, Keeping The Wiring Firm By Suitable Tie/ Tie Mounts/ Pvc Duct Etc As Required. 4.00 Sq Mm Single Run Without Sockets Supply And Laying Of One Number Pvc Insulated And Pvc Sheathed Armouredaluminium Power Cable Of L.1 Kv Grade Of The Following Sizes In The Existing Rcc Hume/ Stone Ware /Gi/ Dw C Pipe As Required. 2 Core 10 Sq Mm Supplying Siemens/ Tropodur Type Nickel Plated Double Compression Brass Cable Gland For Pvc Insulated And Pvc Sheathed Armoured Aluminium/ Copper Conductor Cable 1.1 Kv Grade, And Making End Termination Suitable For2/ 3/3.5/4 Core Cable Of The Following Sizes As Required.L0 Sq Mm L0 Sq Mm Supplying And Providing Earth Clamps For Siemenstropodur Type Cable Glands Of Suitable Length And Other Dimensions Noted Along With Each Size Of Glands For The Followinge Sizes Of Cables As Required. 4Sqmm 16 Sq Mm With 12 Mm Wide X 1 Mm Thick Clip Supply Of Superior Quality Aluminium Tubular Cable Socket And Making Core Termination Of Cables Of The Following Sizes Including Crimpirg Etc. As Required. 10 Sq Mm Supply Route Marker With 102Mmx102mm Cast Iron, Spike 5Mm Thick With Inscription 'Lt Cable, There On Bolted / Welded To 35X35x6mm Angle Iron 60Cm Long And Fixing The Same In Ground As Required. Supplying, Laying And Jointing Of The Following Sizes Of Double Wall Corurgated (Dwc) Pipes Made Out Of Hdpe Conforming To Is 14930 Part Ii For Mechanical Protection To Underground Power Cables With All Required Accessories In Hard Soil 0.75M Below Ground Level Including Excavation 40 / 32 Mm Or Nearest Size Supply And Fixing The Following Sizes Of Pvc Conduit Conforming To Is 9537 / 1983 Part Iii Along With All Required Accessories On Existing Pole/ Concrete Etc. As Service/Protection Pipe As Required 32 Mm Dia Light Gauge Supply And Providing Plate Earthing As Per Is 3043 With 600X600x6.30 Mm Gi/Ci Earth Plate ,20 Mm Gi Watering Pipe Fixed To The Earth Plate With 20 X 3 Mm Gi Clamps, Gi Funnel With Weld Mesh, Filling Required Quantity Of Charcoal Including Construction Of Inspection Chamber With A Bed Concrete Of 1:4:8 Pcc Using 40 Mm Broken Stone (10 Cm Thick), Brick Work In Cement Mortar L:6, Plastering The Surface Of Brick Masonary And The Exposed Surface Of Pcc Bed With Cement Mortar L:4, 12 Mm Thick, (The Finished Inside Dimension Shall Be 300 X 300 X 300 Mm) But Excluding Test Joint, Earth Continuity Conductor To The Plate, And Covering At The Top. (In Ordinary Soil. Supply And Providing The Following Sizes Of Cast Iron Gully Trap With Covering At The Top Of The Inspection Chamber Of Earth Pit As Required 300 X 300 X 6 Mm Cast Iron Gully Trap With Covering Supply And Providing Test Joint For The Earthing System Using 2 Nos Of The Following Sizes Of Strips Including Cutting And Bending To Shape, Drilling Necessary Holes And Fixed To The Watering Pipe Etc As Required. 2X25 X 3 Mm Gi Strip Supply And Providing Earth Lead From The Test Joint To The Earth Electrode Using The Following Sizes Of Conductors/ Strips Including Cutting, Drilling Necessary Holes (In Case Of Strip) And Fixing Firmly With Plate Test Iointetc As Required. 25 X 3 Mm Gi Strip Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required. [28 29] 3.15 Mm Copper Conductor (10 Swg) 25 X 3 Mm Gi Strip Supply Of Superior Quality Copper Earth Socket For The Following Sizes Of Earth Conductor Including Crimping Etc. As Required. 3.12 Mm (10Swg) Supply And Providing Thefollowing Sizes Of Bolt And Nut With Washers On The Existing Ms Box I Earth Bus Etc. As Required Including Drilling Necessary Holes As Required[31 32] 25 X 6Mm Brass Bolt And Nut 25 X 8 Mm Gi Bolt And Nut Fabrication, Supply And Conveyance And Installation Of Name Board With Requird Inscriptions Such As Scheme And The Required Names Etc. Supported By Using Suitable Size Angle Iron Frame Work Including Painting And Fixing The Whole Near The High Mast Pole As Required Including Two Nos Photograps Charges For Kseb Connection Including All Laison Works (Actual Amount Paid On Production Of Receipt)
Refer Detail
Due Date : 30/01/2021
KERALA
Show Page: 1 2 3 4 5 6 7 8 9 10 ...   Show:

Cot Tenders

Tenders information of Cot Tenders in India and Indian tenders for Cot , Tender document For Cot , Cot tenders, Cot Tender information, Live Tender for Cot , Closed Tender for Cot , Free Tender for Cot , Free Full Tender Details for Cot . Live Chat Available for tenders information.