Sales Inquiry Call: +91 9909011030
+91 9909022166
Customer Support: 079-61609928
079-61609940
Within Search :
No. Tenders ID & Tenders Brief
1 Tenders: 16950682 Bright Steel Round Bar Dia 3/4" & Bright Steel Round Bar Dia.
Refer Detail
Due Date : 23/10/2018
MAHARASHTRA
2 Tenders: 16925773 Request For Quotation Supply Of Round Bars, Pipes, Plate Oct18 .
2,01,02,018.00
Due Date : 20/10/2018
GUJARAT
3 Tenders: 16923126 Supply And Delivery Of Different Diameter Of Tmt (Fe 500) Steel Bars Of Tata/Sail/Rinl Make Confirming To Is1786 2008 (With Latest Revision, If Any) For Administrative Building At Barasat, North 24 Parganas Under Kmda. .
Refer Detail
Due Date : 31/10/2018
WEST BENGAL
4 Tenders: 16920276 Supply Of Tmt Steel Bars For Type A 32 Nos At Police Line Bharaich .
Refer Detail
Due Date : 16/10/2018
UTTAR PRADESH
5 Tenders: 16919697 Supply Of Steel Rods Deformed Steel Bars (Tmt).
Refer Detail
Due Date : 22/10/2018
MAHARASHTRA
6 Tenders: 16918678 Procurement Of Barstock .
Refer Detail
Due Date : 15/10/2018
PUNJAB
7 Tenders: 16906007 Installation Testing And Commissioning Of New Hcp And Reinstallation Of Existing Hcp Including Other Allied Works At Sprain In Hiranagar Installation, Testing & Commissioning Of 40Hp X 8000 Gph X 175 M Head New Hcp & Re Installation Of Existing 45Hp X 8000 Gph X 140M Head Hcp Including Other Allied Works At P/S Sprain In Hiranagar. 1 Earth Work Excavation Around Existing Foundation Block Of 45Hp X 8000 Gph X 140M Head Hcp , Dismantling Of Unserviceable Foundation Block By Using Pick Axes , Chisels, Hammer, Vibrator And Allied Material By Using Skilled Labour, Cutting Of Tor Steel By Using Welding Set And Requisite Material , Disposing Off The Dismantled Concrete And Allied Material At Suitable Place Using Manual Labour. Complete Job 2 Laying Of Foundation Block Of 40 Hp X 8000 Gph X 175 M Head New Hcp & 45Hp X 8000 Gph X 140M Head Old Hcp By Way Of Excavation In All Sort Of Soils, Shuttering The Excavated Trench As Well As Over Ground Depth Of 2.50 X 1.80 X 0.90M, Providing & Fixing Of 15Mm X 0.90 M 12 Nos. Foundation Bolts For New And Existing Pump Set, Placing Of 8Mm Tor Steel Bars In A Mesh Of 0.15 X 0.15 M Horizontally As Well As Vertically As Per Requirement At Site For Both The Pump Sets By Using Suitable Winding Wires After Proper Leveling The Base Frames 02 Nos, Keeping Of Base Frame Of The Hcp Horizontally On Top Of The Shuttering , Laying Of Cement Concrete In 1:2:4 Mix. By Mixing Of Cement Concrete In Proper Way. Carriage Of New Induction Motor And Hc Pump Along With Base Frame Manually From Road Side To Site Of Work. The Complete Job Includes Skilled , Semiskilled Labourers, Cost Of Material , Carriage Of Sand & Bajri From Nallah To Site Of Work Including Carriage Of Other Materials, Cost Of 8Mm Dia Tor Steel , Cement, Shuttering Material, Hire Charges Of Tools And Tackles Involved Including Curing Of Cement Concrete Block For 07 Days. 3 Providing, Installation, Testing And Commissioning Of Horizontal Centrifugal Pump Set Having Parameter Of 40 Hp X 8000 Gph X 175 M Head Along With Base Plate And Coupling Pulley Set Of Ksb/ Kirloskar/ Mathurplant /Cri Or Any Other Reputed Isi Make. The Impellers Should Be Of Cast Iron Whereas Shaft Should Be Of Stainless Steel 40 C8, The Lubrication Of The Bearing Should Be Grease Type. The Pump Efficiency Should Be 22.20 Of 61% Bkw Consumed At Pump Shaft, The Casing And Ci Stuffing Box Should Be Of Cost Iron. The Pump Temperature Co Should Be Of 1.0 Ambient Specific Gravity. The Induction Motor Should Be Of Abb/Kirloskar/Crompton Greaves Or Any Other Reputed Make To Be Coupled With The Multistage Centrifugal Pump Should Be Of 40Hp, 3 Phase And 50 Hz A.C Supply With 2900 Rpm Rating Suitable For Running Upto 415 Volts ± 10% Volts With Ip 55 Motor Protection, The Motor Body Should Be Aluminum/Cast Iron Suitable For Ambient Temperature. The Coupling Pulley Set Should Be Of Cost Iron To Be Used For Interlocking The Pump And Motor Along With Rubber Bushes And Coupling Bolts As Per Required Size Should Also Be Provided Along With. 4 Leveling Of Base Frame By Placing The Base Frame Of The Pump And Motor On Top Of The Base Frame Manually With Spirit Level By Way Of Adding Shims Etc. So That Pump And Motor Can Be Coupled Without Any Offset. Fitting The Pump Set By Using Heavy Duty Nuts, Bolts, Washers With Proper Alignment. The Job Includes The Cost Of Material And Labour Charges (02 Pump Sets). 5 Fabrication Of Suction Pipe Line Of The 40 Hp X 8000 Gph X 175 M Head Hcp & 45Hp X 8000 Gph X 140M Head Old Hcp By Way Of Fabrication Of Flanges Out Of 12 Mm Thick Ms Plate, Fabrication Of 80 Mm Dia. Suction Pipe Line As Per Site Requirement By Using Required 80 Mm Dia. M.S Bends And Flanges As Per Site Requirement. Providing And Fitting Of 80 Mm Dia. Sluice Valve Of Quality Make On Suction Pipe Line Of The Hcp Using Ms Flanges On Its Both Ends. The Welding Work Should Be Homogeneous And Of Good Quality By Using Quality Electrodes. The Job Includes Cutting And Welding Of Pipes With Flanges, Providing And Fitting Of Nuts, Bolts , Rubber Gaskets And Other Allied Material. The Job Includes Cost Of All Sort Of Material Including Skilled And Semiskilled Labour Charges (02 Pump Sets). 6 Fabrication Of Delivery Pipe Line Of The 40 Hp X 8000 Gph X 175 M Head Hcp & 45Hp X 8000 Gph X 140M Head Old Hcp By Way Of Fabrication Of Flanges Out Of 12 Mm Thick Ms Plate, Fabrication Of 80 Mm Dia. Delivery Pipe Line As Per Site Requirement By Using Required 80 Mm Dia. M.S Bends And Flanges As Per Site Requirement. Providing And Fitting Of 80 Mm Dia. Sluice Valve & Reflex Valve Of Quality Make On Delivery Pipe Line Of The Hcp Using Ms Flanges On Its Both Ends. The Welding Work Should Be Homogeneous And Of Good Quality By Using Quality Electrodes. The Job Includes Cutting And Welding Of Pipes With Flanges, Providing And Fitting Of Nuts, Bolts, Rubber Gaskets And Other Allied Material. The Job Includes Cost Of All Sort Of Material Including Skilled And Semiskilled Labour Charges (02 Pump Sets). 7 P/F Of 50 Hp Oil Immersed Star Delta Starter For Operation Of Upto 60 Hp Induction Motor Star Delta Starter. The Job Involves Shifting Of Starter To Site, Making Holes On The Panel Board At Required Distance For Installation Of Starter. P/F Of Copper Leads Starter To Motor Duly Provided With Crimped & Taped Thimbles & Making Star Delta Connection. P/F Of New 10 Litre T.Oil & Dash Pot Oil In The Starter In Separate Tanks & Dash Pot Assly. Making Adjustment Of Dash Pot Assly. Connecting Power Supply & Testing Commissioning At Site. Complete Job Includes Cost Of Material & Labour Charges. 8 Providing And Fitting Of 16Mm Sq. 3 Core Multi Strand Copper Wires From Starter To 40 Hp Induction Motor For 03 Pumps Hcp. The Job Includes Proper Thimbling At Each End. The Copper Wires Should Be Of Is Specifications. The Job Includes Cost Of Material And Labour Charges. 9 Providing, Fitting, Testing And Commissioning Of 120Mm Sq.,3.5 Core Armoured Aluminum Cable For Connecting Supply From Lt Side Of Transformer To Main Switch. The Job Also Includes Proper Thimbling On Each End. The Job Includes Cost Of Material And Labour Charges.
5,80,000.00
Due Date : 15/10/2018
JAMMU AND KASHMIR
8 Tenders: 16896906 Supply Of Hot Rolled Round Steel Bar, Designation Isro 16 (As Per I.S:1732/89) To Material Steel To Is:2062/2011, Grade E 250 Quality A (K).
Refer Detail
Due Date : 29/10/2018
MULTI STATE
9 Tenders: 16880146 Supply Of Looming Bar 545X50 (Type 3) To Clw Spec No. Clw/Es/3/0119 Alt F .
Refer Detail
Due Date : 16/10/2018
PUNJAB
10 Tenders: 16879300 Supply Of Pry Bar For Injector Removing To Emd Pt No: 8041183 Dlw Pt No : 15610720 And Dlw Drg No : Mt01gm0176 Alt Nil Or Latest.
Refer Detail
Due Date : 12/10/2018
ANDHRA PRADESH
Show Page: 1 2 3 4 5 6 7 8 9 10 ...   Show:

Steel Bar Tenders

Tenders information of Steel Bar Tenders in India and Indian tenders for Steel Bar , Tender document For Steel Bar , Steel Bar tenders, Steel Bar Tender information, Live Tender for Steel Bar , Closed Tender for Steel Bar , Free Tender for Steel Bar , Free Full Tender Details for Steel Bar . Live Chat Available for tenders information.