Within Search :
No. Tenders ID & Tenders Brief
1 Tenders: 24324633 Releasing And Refixing Of Signalling Gears For Deep Screening Of Point And Crossing By Bcm At Various Stations In Den/East/Tpj Jurisdiction Bidding Type Normal Tender .
18,30,479.00
Due Date : 16/02/2021
TAMIL NADU
2 Tenders: 24310022 Reconditioning Of Worn Out Points & Crossings In The Jurisdiction Of Aden/ Ndls. Bidding Type Normal Tender .
62,23,040.00
Due Date : 16/02/2021
NEW DELHI
3 Tenders: 24299090 Reconditioning Of Worn Out 1 In 12 & 1 In 8.5 Crossing Body, Switches Etc. Under The Jurisdiction Of Den/Iii/Kir For 18 Months. Bidding Type Normal Tender .
16,64,899.00
Due Date : 10/02/2021
BIHAR
4 Tenders: 24250887 Signalling Rearrangements In Connection With The Renewal Of Points And Crossings By Engineering Department 112 Sets (Cs+Cmsc) In Palakkad Division. Bidding Type Normal Tender .
46,24,876.00
Due Date : 08/02/2021
KERALA
5 Tenders: 24249581 Linking Of P.Way Track And Other Ancilliary Work Including Laying Of Points And Crossing Etc. In Between Bandel (Including Yard ) And Mogra(Including Yard) In Connection With Bandel Boinchi New Third Line Work. Bidding Type Normal Tender .
3,91,20,030.00
Due Date : 05/02/2021
WEST BENGAL
6 Tenders: 24240958 Gulma Rajabhatkhawa Tsr(P) 48 Sets (On Points & Crossings). Bidding Type Normal Tender .
2,38,48,854.00
Due Date : 10/02/2021
WEST BENGAL
7 Tenders: 24238846 Guntur Guntakal Section Proposed Double Line Work Between Nallapadu Donakonda Stations Proposed Laying And Linking Of Bg Track, Assembling And Insertion Of Points And Crossings , Leading And Dumping Of Stone Ballast And Execution Of Other Miscellaneous Works From Ch.71000.00M To 105000.00M (34 Kms) Between Savalyapuram And Kurichedu Stations ( Including Savalyapuram, Vinukonda, Cheekateegalapalem, Gundlakamma Yards Excluding Kurichedu Yard) Bidding Type Normal Tender .
22,79,31,577.00
Due Date : 09/02/2021
MULTI STATE
8 Tenders: 24214848 Dholpur Mathura Section : Provision Of Dual Detection With Redundancy At 10 Stations Over Agra Division. Bidding Type Normal Tender . (NS01 112.00 Numbers 420766.07 47125799.84 AT Par 47125799.84 Description: Supply of digital axle counter multi section type complete including central evalutor, Final track clearnce relay for each track section, Reset boxes, LV boxes, detection points etc. Fully wired to ultimate capacity and fully equipped as per RDSO specification no. RDSO/SPN/176/2005 (Ver.2) or latest .(112DP catering to atleast 65TS) ( Inspected by RDSO ) (Per DP= Nos.) NS02 72.00 Numbers 420766.07 30295157.04 AT Par 30295157.04 Description: Supply of digital axle counter multi section type complete including central evalutor, Final track clearnce relay for each track section, Reset boxes, LV boxes, detection points etc. Fully wired to ultimate capacity and fully equipped as per RDSO specification no. RDSO/SPN/176/2005 (Ver. 2) or latest.( 72DP catering to atleast 54TS ) ( Inspected by RDSO ) (Per DP= Nos.) NS03 24.00 Numbers 420766.07 10098385.68 AT Par 10098385.68 Description: Supply of digital axle counter multi section type complete including central evalutor, Final track clearnce relay for each track section, Reset boxes, LV boxes, detection points etc. Fully wired to ultimate capacity and fully equipped as per RDSO specification no. RDSO/SPN/176/2005 (Ver. 2) or latest.( 24DP catering to atleast 22TS ) ( Inspected by RDSO ) (Per DP = Nos.) NS04 9.00 Set 16587.44 149286.96 AT Par 149286.96 Description: Installation of MSDAC which Includes Central Evaluator of Axle counters, wiring from CT rack to Central Evaluator Installation and wiring of Rset Box, LV Box and associated power supply wiring. This includes the supply of shielded cable required conductor size and power supply cable. The power supply wiring cable should not be less than 10 Sq. mm PVC wire from power room to Central evaluator, earthing as per OEM's guidelines and specifications with their own material. This also includes painting and writing work on Evaluator and other concerning location as per site requirement and should have auto reset facility with DC track circuit . NS05 208.00 Numbers 11058.29 2300124.32 AT Par 2300124.32 Description: Installation of track device / double rail contact unit for entry or exit with conductors all material including drilling of required sizes holes on rails for fixing these, taking the cable lead through anit rodent, antioxidant And non flame propagating type Double walled corrugated (DWC) pipe as per IS144930 Part I or II or latest from track device to location digging of trench under trak and up to location/Track side unit and all other accessories as per site requirement for laying of traqnsmitter and receiver cable with suitable wire embeded rubber pipe with clamp for protecting these cables at DP end. This includes supply and installation of mushroom/any other arrangement approved by OEM including foundation .All material to be supplied by contractor only . (Rate Per DP= Nos.) NS06 2.00 Set 74413.65 148827.30 AT Par 148827.30 Description: Supply of portable operator console for on site programming of axle counter as per technical specifications attached.(Annexure 1).( Inspected by Consignee ) NS07 2000.00 Numbers 165.61 331220.00 AT Par 331220.00 Description: Disconnect Terminal block for Four conductor with screwless Cage Clamp type/sliding switch disconnect as per RDSO Specification No. RDSO/SPN/189/2004 version 1.2, for each conductor size upto 2.5 sq. mm. Equivalent of M6 Terminals. Each Terminal block equipped with two markers on top and bottom, an end plate, 2 end clamps And adequate length rails for fitting terminal blocks.( Inspected by Consignee ) NS08 1.00 Numbers 291810.58 291810.58 AT Par 291810.58 Description: Supply of mini time domain reflectometer (OTDR) operating at 1550nm And1310 nm for working on single mode fibre as per sec.no GR/OTD 2/02 Jan 2005 with latest amendment model no AQ 7260+ AQ 7261 make yokogawa electric corporation japan or similar.( Inspected by Consignee ). NS09 40.00 Kilometre 7474.47 298978.80 AT Par 298978.80 Description: 16/0.2mm size tinned flexible single core indoor wire IRS : S 76/89 Amend. No. 3 or with latest amendment/specification, PVC coated in different colours as per technical specifications and to be supplied in coils of 100 meters.( Inspected by Consignee ) NS10 40.00 Kg 856.42 34256.80 AT Par 34256.80 Description: Supply of Solder Wire Resin core 60/40, 18 SWG(PHILCO / KHOSLA/Approved MAKE) ( Inspected by Consignee ) NS11 450.00 Numbers 82.82 37269.00 AT Par 37269.00 Description: Non deteriorating type low voltage cyndrical head cartridge ELECTRIC fuse 2/4/6/10A as per Specn No IRS/S/78/92 with latest amendmends ( Inspected by RDSO ) NS12 24.00 Numbers 16533.42 396802.08 AT Par 396802.08 Description: Supply of DC DC Converter as per Spec No. IRS:S 96/2000 or with latest amendment / specification rating 24/40 70 100 110 130 Volt DC.10A.( Inspected by RDSO ) NS13 24.00 Numbers 5895.53 141492.72 AT Par 141492.72 Description: Installation and wiring of DC DC converter NS14 450.00 Numbers 148.39 66775.50 AT Par 66775.50 Description: FUSE BLOCK MADE OF PBT/POLYCARBONATE as per IRS S 75/2006 And RDSO Drg No SA 23748 Alt 4 suitable for Cartridge fuse block cyndrical head fuse links.( Inspected by RDSO ) NS15 3.00 Station 57400.00 172200.00 AT Par 172200.00 Description: Modification to existing drawings for stns. provided with Level Crossing gate MACLS such as circuit diagram, cable route plan, cable core chart, power supply diagram, Signal lamp/LED card, battery history card etc. inter connection drawing with Relay Room and Equipment room etc. Locking table and dog chart on the basis of approved signalling plan. Square sheet, modification/ preparation of cable termination chart in Relay Room and Apparatus Cases, Apparatus cases Wiring Plan, Cable Insulation chart, Earth resistance chart, circuit route termination chart, equipment dispostion plan , Fuse analysis chart, terminal analysis and contact analysis plans, Station Working Rule Diagram (SWRD), SWR PD,etc.( Inspected by Consignee ) NS16 3.00 Station 40321.71 120965.13 AT Par 120965.13 Description: Preparation and supply of laminated one set of MODIFIED completion drawings including circuit diagrams and documents as per the technical specifications, for keeping at each station.( Inspected by Consignee NS17 5000.00 Metre 35.89 179450.00 AT Par 179450.00 Description: Power wire (copper, multi strand) as per IS 2465/1984 And IS 694/1990 (1x6Sq.mm). 85 conductor each dia 0.30 +/ 0.01 with insulation thickness of 1.55 mm nominal conductor assistance 3.14 ohms/km and test parameters as per IRS(S)76/89.( Inspected by Consignee ) NS18 4.00 Kilometre 112953.86 451815.44 AT Par 451815.44 Description: Po we r wire (copper, multi strand) as per IS 2465/1984 And IS 694/1990 (1x16 Sq.mm).101 Conductors each dia 0.45 + 0.01 with insulation thickness of 1.2mm nominal conductor resistance 1.127 Ohms/Km and test parameters as per IRS(S) 76/89.( Inspected by Consignee ) NS19 500.00 Metre 250.85 125425.00 AT Par 125425.00 Description: PVC insulated multstrand 35 Sq. mm. Cu Cable as per IS:694 or latest for connecting earth bus bar to earth electrode as per RDSO Drawing SDO/RDSO/EAndB/001 OR LATEST.( Inspected by Consignee ) NS20 4.00 Job 10732.22 42928.88 AT Par 42928.88 Description: Splicing of 24 fibre optic fibre Cable and making straight joint with contractors own splicing machine and tools joint should be prepared in such a way that the top of the enclosure should be covered with soft soil and then bricks. NS21 400.00 Numbers 409.15 163660.00 AT Par 163660.00 Description: supply and installation of Cable route marker of stone of approved type in size 1.2 mtr x 0.2 mtr x 0.1 mtr with maximum 5 % tolerance on maximum 5% markers, engraved 'NCR" "SAndT" on top portion.( Inspected by Consignee ) NS22 500.00 Metre 339.26 169630.00 AT Par 169630.00 Description: Copper Tape 25x2 mm for interconnection of earth electrodes as per RDSO Drawing SDO/RDSO/EAndB/001 OR LATEST( Inspected by Consignee ) NS23 500.00 Metre 106.55 53275.00 AT Par 53275.00 Description: 10 sqmm copper cable IS 694 of 1990. ( Inspected by Consignee ) NS24 6.00 Numbers 17660.94 105965.64 AT Par 105965.64 Description: Supply of U plain storage almirah with 4 adjustable shelf of Godrej make or similar.( Inspected by Consignee ) NS25 6.00 Numbers 9797.01 58782.06 AT Par 58782.06 Description: Supply of Office Table having laminated top godrej make or similar .( Inspected by Consignee ) NS26 12.00 Numbers 2723.13 32677.56 AT Par 32677.56 Description: Supply of chair of Godrej make or similar .( Inspected by Consignee ) NS27 6.00 Numbers 1146.18 6877.08 AT Par 6877.08 Description: Supply of Steel stool of godrej make or similar ( Inspected by Consignee ) NS28 3.00 Numbers 17107.20 51321.60 AT Par 51321.60 Description: Supply of AC/DC True RMS Reading, Digital Clamp Meter. Model DCM39A, Make Motwane or similar of reputed make.( Inspected by Consignee ) NS29 3.00 Numbers 11220.78 33662.34 AT Par 33662.34 Description: Supply of True RMS reading Digital multimeter Rishabh 18 S/Fluke make.( Inspected by Consignee NS30 1.00 Numbers 434559.59 434559.59 AT Par 434559.59 Description: Supply And Installation of pre fabricated cabin building having outer dimensions of 6000 x 3000 x 3080 mm made of polyurethane foam sandwitch panels in equipment room, relay room complete with partition wall, doors, elastomeric water proofing, ventilators, exhaust fans, sun/rain guard, PVC flooring, Tube lights, fans etc. as per specifications and drawing to be approved by representative of Sr.DSTE/Agra alongwith manufacturer's test and guarantee certificate to be submitted by the contractor.( Inspected by Consignee ) NS31 50.00 Set 1527.22 76361.00 AT Par 76361.00 Description: Supply of heat shrinkable straight through joint for underground Jelly filled cable, with all accessories as per RDSO Specn. No. IRS:TC 77 2010 (Rev 3.0) with Amdt 1And2.( Inspected by Consignee ) NS32 50.00 Set 1570.89 78544.50 AT Par 78544.50 Description: Supply of heat shrinkable derivation joint for underground cable, different sizes with all accessories as per RDSO Specn. No. IRS:TC 77 2010 (Rev 3.0) with Amdt 1And2.or latest as per size of conductor and pair.( Inspected by Consignee ) NS33 100.00 Numbers 667.87 66787.00 AT Par 66787.00 Description: Making of straight/derivation through joint for underground jelly filled cable/ 4 quad cable. NS34 1.00 Numbers 946417.97 946417.97 AT Par 946417.97 Description: Supply of cable route tracer model no: RD8100 OF M/Radio detection (U.K).( Inspected by Consignee ) NS35 4000.00 Metre 347.49 1389960.00 AT Par 1389960.00 Description: Double walled corrugated (DWC) Size of Outer Dia 120 mm / inner dia 103.5 mm, having non flame propagation and anti rodent properties, electrex/telerex/optirex or similar as per TEC specifications GR/DWC45"4744,IS 14930 part II, and technical specifications, along with socket/coupler and T joints wherever required having IP 67 protection, for underground power/signalling/telecommunication cable protection.( Inspected by RITES) NS36 12000.00 Metre 57.88 694560.00 AT Par 694560.00 Description: Excavation of cable trench as per cable route plan, 1 mtr deep And 300 mm wide alongside the track in all type of soil, conforming to the distances as per cable route plan and refilling after cable laying. This work includes clearing of routes, bushes etc. The work shall be done as per the extant practice And instructions of site engineer. In case depth of trench not achievable due to site conditions proportionate payment shall be made. NS37 600.00 Metre 240.97 144582.00 AT Par 144582.00 Description: All works of excavation of cable trench 1.0 Meter deep, 0.3 Mater wide on pucca platform/on Road for road crossing and restoration of the platform/Road surface to original condition with contractor's material, after laying of GI/DWC pipes and then re filling the trench as per Technical Specifications. NS38 4000.00 Metre 913.32 3653280.00 AT Par 3653280.00 Description: Horizontal boring under railway track/ road etc for laying all dia, DWC (Double Walled Corrugated) pipes at the depth of 1.4 meter to 2.1 meter from formation level (Level of earth below ballast) as per drawing and directed by engineer in charge by trenchless technology excluding the cost of DWC pipes. NS39 4000.00 Metre 10.84 43360.00 AT Par 43360.00 Description: Laying of Double Wall Corrugated (DWC) pipe of all sizes with socket, coupler and T Joint etc. by digging of trench 0.3 Meter width, 1.2 Meter depth from rail flange under track for track crossing and refilling after laying of pipes, as per technical specifications and the restoration of disturbed ballast by screening and dressing as per instruction of Engineer in charge or his representatives at site. NS40 65000.00 Metre 4.38 284700.00 AT Par 284700.00 Description: Laying of signalling/telecom/ Power cable in the trench/GI /RCC/DWC pipe (Note: Before issuing of cable to the contractor the cable will be meggred jointly by the contractor and SSE/Sig, SSE/Tele in his depot and meggering certificate will be submitted in the office of the engineer incharge. The same procedure will be adopted after the cable is laid at site without which no payment will be made to the contractor in his account. If the insulation resistance after laying of cable is less than the reading previous meggering report the contractor will have to repair or replace the defective cable at his own cost for which no charges will be paid by Railway). This also include making of suitable telecom and signalling cable joints as per std. Rly. practice and as per instruction of site incharge. NS41 5.00 Numbers 41904.72 209523.60 AT Par 209523.60 Description: Supply And Erection of Relay rack, frame, scaffolding and ladder/angle for relay room, power equipment room, batteries room and other places as required, all oven baked and powder coated with Biscuit Mat colour corrosive resistant and final finish with Grey (Sigma) enamelled paint, complete as per drawing No. CSTE/ with fuse strip, anodized bars/strip for relay bases, Insulators, grouting bolts, tripods, rack fittings, ladder arrangement, all necessary fitting, supports, insulators, PVC slotted trunking having removable covers.Capacitors, resistors, diodes and other accessories etc. as per drawing and technical specifications And Erection of relay racks with scaffolding arrangement, suitable grounding arrangements, fixing of tag blocks on relay racks and complete all the accessories as per technical specifications. ( Inspected by Consignee ) (In Relay room) (Annexure 2) NS42 5.00 Numbers 35139.67 175698.35 AT Par 175698.35 Description: Termination of cable, Supply And Erection of Cable Termination rack, frame, scaffolding/laddr/angle, all oven baked and powder coated with Biscuit Mat colour corrosive resistant and final finish with Siemens Grey (Sigma) enamelled paint, complete as per drawing No. Drg No. CSTE/ with Insulators, grouting bolts, tripods, rack fittings, ladder arrangement, hylam sheet board of 10 mm thickness covering complete rack, all necessary fitting, supports, insulators, string rods to support cable, and other accessories etc. as per drawing and technical specifications And Erection with scaffolding arrangement, fixing of tag blocks and all types of terminals on cable termination racks as per technical specifications. (Annexure 3) NS43 5000.00 Numbers 10.84 54200.00 AT Par 54200.00 Description: Complete indoor wiring by Running of Indoor cables and carrying out jumpering as per approved circuit diagram at station including Fixing of relays And relay groups on relay racks And bases on anodised bar/relay base supporting strips, Soldering of tag block terminals, relay bases terminals and contacts clip, including supply of resin core solder of approved make for soldering, condensers, resistances, threads/self locking PVC clips And lugs, dressing, providing wires/cables on batons with clips/ladder for various functions And up to CT rack, terminal strip, writing description of circuits on base plates, relays, power equipment, fuses, terminals etc. as wiring diagram with suitable colour paints as per standard practice and technical specifications with contractor's cement, sand, aggregate etc wherever required. NS44 400.00 Numbers 45.08 18032.00 AT Par 18032.00 Description: Supply of Lacing thread rolls, black, wax coated ( 100 mtrs each). thin And thick in the ratio of 3:4.( Inspected by Consignee )(Qty. in ROLL) NS45 400.00 Numbers 24.35 9740.00 AT Par 9740.00 Description: Supply of Adhesive tape rolls, PVC (19 mm x 10 mtrs steel grip make in four colours. Red, Blue, Yellow And black in equal quantity.( Inspected by Consignee Description: Supply of Apparatus cases Full made of 10 SWG sheets with miniature E Type Lock of same wards as that available on existing location box of station without keys as per spec. No. IRS S 30/64 And RDSO Drg: NO. SA 3473/M(Adv) with latest amendments and as per Technical Specifications and drawing no: SK 783.( Inspected by RITES) NS47 10.00 Numbers 13093.26 130932.60 AT Par 130932.60 Description: Supply of Apparatus cases half made of 10 SWG sheets with miniature E Type Lock of same wards as that available on existing location box of station without keys as per spec. No. IRS S 30/64 And RDSO Drg: NO. SA 3473/M(Adv) with latest amendments and as per Technical Specifications. and drawing no: SK 783.( Inspected by Consignee ) NS48 40.00 Numbers 5579.21 223168.40 AT Par 223168.40 Description: Supply of Paper base, resin bonded, Phenolic Laminated Sheet, conforming to 10 mm thick IS 2036 of 1974 grade P3 in standard size of 1.22 Mtr. X 1.22 Mtr. Manufacturer test certificate to be submittd by contractor. and drawing no: SK 783.( Inspected by Consignee ) NS49 30.00 Numbers 1404.87 42146.10 AT Par 42146.10 Description: Installation of Apparatus cases/Location Boxes on CC foundation on grounted bolts, including filling the space enclosed below the location box with contractor's sand, as per technical specifications Apparatus case (Full). NS50 10.00 Numbers 1205.17 12051.70 AT Par 12051.70 Description: Installation of Apparatus cases/Location Boxes on CC foundation on grounted bolts, including filling the space enclosed below the location box with contractor's sand, as per technical specifications Apparatus case (Half). NS51 40.00 Numbers 2158.00 86320.00 AT Par 86320.00 Description: fabrication and fixing of Hylam board in location box single by providing all fixtures as per Railway practice including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per instruction of site incharge of Railways and / standard practice on the division. NS52 30.00 Numbers 409.28 12278.40 AT Par 12278.40 Description: Termination of cables and supporting on string rod, with supply and providing identification tags/ferrules/tapes with letters on each case conductor, as per technical specifications. Apparatus case (Full)(Qty. in Per location) NS53 10.00 Numbers 358.69 3586.90 AT Par 3586.90 Description: Termination of cables and supporting on string rod, with supply and providing identification tags/ferrules/tapes with letters on each case conductor, as per technical specifications. Apparatus case (Half)(Qty. in Per location) NS54 60.00 cum 2308.13 138487.80 AT Par 138487.80 Description: Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6, aggregate not exceeding 3 : 8 cm including excavation,raming, curing and plastering with 1 : 4 cement sand mixture complete with contractor's material including cement, sand, aggregate and curing of casted foundation, refilling And ramming of loose soil around foundation and disposal of loose dugged soil from site. NOTE: Due to local condition in very special circumstances if the size of the foundation for all the above items is required to be increased / decreased, the extra payment /deduction for variation of the CC work shall be calculated on volumetric basis as per rate of this item. NS55 30.00 Numbers 270.17 8105.10 AT Par 8105.10 Description: Lettering/Numbering termination particulars equipment names etc. legibly and neatly inside location boxes Single case Location boxes. (Inspection by Consignee) NS56 10.00 Numbers 189.12 1891.20 AT Par 1891.20 Description: Lettering/Numbering termination particulars equipment names etc. legibly and neatly inside location boxes Half case Location boxes. (Inspection by Consignee) NS57 30.00 Numbers 5037.81 151134.30 AT Par 151134.30 Description: Excavation, ramming, Casting Cement Concrete foundation for apparatus cases/Location boxes in the ratio of 1: 3: 6 Aggregate not exceeding 3: 8 cm, as per Drg. No. SK 748 and technical specifications using standard size galvanized Anchor bolts And nuts (also referred to as foundation bolts) conforming to IRS Drg. No. SA 116A / M, for erection of Apparatus cases/Location boxes, plastering with 1:4 cement sand mixture all the surface up to 75mm below ground level, complete with contractor's material including cement, sand, stones, anchor bolts and nuts and curing of casted foundation, refilling And ramming of loose soil around foundation and disposal of loose dugged soil from site. Apparatus case (Full) NS58 10.00 Numbers 4198.56 41985.60 AT Par 41985.60 Description: Excavation, ramming, Casting Cement Concrete foundation for apparatus cases/Location boxes in the ratio of 1:3:6 Aggregate not exceeding 3:8 cm, as per Drg.No. SK 747 and technical specifications using standard size galvanized Anchor bolts And nuts (also referred to as foundation bolts) conforming to IRS Drg. No. SA 116A /M, for erection of Apparatus cases/Location boxes, plastering with 1: 4 cement sand mixture all the surface up to 75mm below ground level, complete with contractor's material including cement, sand, stones, anchor bolts and nuts and curing of casted foundation, refilling And ramming of loose soil around foundation and disposal of loose dugged soil from site.Apparatus case (Half) NS59 40.00 Set 16792.08 671683.20 AT Par 671683.20 Description: A set of complete Earthing and Bonding system as per code of practice RDSO/SPN/197/2008 or latest, to construct earthing of
10,47,77,661.00
Due Date : 19/02/2021
UTTAR PRADESH
9 Tenders: 24214723 Ctr (P) Of Up Bg Main Line Of Station Yards With 60 Kg, 90 Uts Rails & Psc 60 Kg Sleeper ( M+8) Density Including Renewal Of 52 Kg Turn Outs (Switch, Crossings, Lead Rails Etc.) By 60 Kg Turn Outs In Taraon Ghazipur City Section To Eliminate Junction Fish Plates And Maintenance Of Newly Laid Bg Track Main Line, Loop Lines And Points And Crossing Between Aunrihar (Incl.) To Ghazipur City (Incl.) In Aunrihar Gazipur City Doubling Work Of Varanasi Division Of Ne Railway Bidding Type Normal Tender .
1,32,37,940.00
Due Date : 02/02/2021
UTTAR PRADESH
10 Tenders: 24186062 Reconditioning Of Points And Crossings At Various Station Yards Under The Jurisdiction Of Sr. Divisional Engineer/South/Waltair And Divisional Engineer/East/Waltair On Main Line Of Waltair Division. Bidding Type Normal Tender .
2,34,30,223.00
Due Date : 28/01/2021
ANDHRA PRADESH
Show Page: 1 2 3 4 5 6 7 8 9 10 ...   Show:

Points And Crossing Tenders

Tenders information of Points And Crossing Tenders in India and Indian tenders for Points And Crossing , Tender document For Points And Crossing , Points And Crossing tenders, Points And Crossing Tender information, Live Tender for Points And Crossing , Closed Tender for Points And Crossing , Free Tender for Points And Crossing , Free Full Tender Details for Points And Crossing . Live Chat Available for tenders information.