Sales Inquiry Call: +91 9909011030
+91 9909022166
Customer Support: 079-61609928
079-61609940
Within Search :
No. Tenders ID & Tenders Brief
1 Tenders: 17426958 Unit 8 Ahu Coil Header Replacement With Descaling Of Copper Tubes And Retrofitting.
Refer Detail
Due Date : 28/12/2018
KARNATAKA
2 Tenders: 17407707 Auction Sale Of Scrap Conemned Modified After Cooler With Copper Tube And Fins With Or Without Ferrous Fitting ( Pl 98210314 ), 38 Nos. .
Refer Detail
Due Date : 13/12/2018
PUNJAB
3 Tenders: 17378913 Supply Of Heavy Duty Copper Tube Terminal End For Solder Less Crimping For Copper Conductor Of Sizes: (1) 4 Sq. Mm. (2) 6 Sq. Mm. (3) 10 Sq. Mm (4) 16 Sq. Mm (5) 35 Sq. Mm. (6) 50 Sq. Mm. (7) 70 Sq. Mm. Make: Dowell, Jainson Or Equal. Total Qty= 01 Set.
Refer Detail
Due Date : 10/12/2018
ASSAM
4 Tenders: 17372669 Supply And Installation Of 2Ton Spilt Type Air Conditioner 5Star Rating With 5Kva Stabilizer And Copper Tube For The Use At Carrier Communication Room Of Periyar Power House Of This Generation Circle .
1,30,190.00
Due Date : 21/12/2018
TAMIL NADU
5 Tenders: 17342283 Auction Sale Of Cond. And U/S Copper Tubes In Full/Broken Of Sorts And Sizes With Available Attachments In As Is Where Is Basis.Note: Segregation Is Not Permittedlocation Shed 2 Bin G.Pl.No.98210191. .
Refer Detail
Due Date : 10/12/2018
TAMIL NADU
6 Tenders: 17316091 Supply Of Copper Tube 6.35Mm. Od X 1.22Mm Wt X El 7.625Mtr,To Specification Bsen 1057 1996 R 220 Annealed. (Unit Is Changed From Nos. To Kgs And Requirement Is In Kilograms Only) .
Refer Detail
Due Date : 07/12/2018
KERALA
7 Tenders: 17314729 Supply Of Dowells Brand Heavy Duty Copper Tube Terminals Suitable For Solderless Crimping To Copper Or Aluminium Conductor Of Size 70Sq.Mm/M10/Cus 358 .
Refer Detail
Due Date : 12/12/2018
TAMIL NADU
8 Tenders: 17314720 Supply Of Copper Tube Terminal For Solderless Crimping To Aluminium/Copper Conductors Of Dowells Make Cus31 Hole Size 300Sq/M16 .
Refer Detail
Due Date : 12/12/2018
TAMIL NADU
9 Tenders: 17303788 Portable Type Oil Content Meter For Measuring Oil Upto 30 Ppm In Water . 1] Design Parameters : 1.1] Influent Condition A) Oil Content : 30Ppm Maximum In Effluent Water. B) Specific Gravity Of Oil. : 0.65 To 0.9 C) Tss In Water : 150 Mg/Litre A) Portable Type Oil Content Meter For Measuring Oil Content Upto 50 Ppm . Oil Content Meter With Measuring Cell And Very Small Pump With Flexible Pipes Are Fitted In A Small Trolly With Wheel Which Can Be Moved From One Site To Another Site Or Can Be Fitted In A Fixed Spot . B) Pump : The Ocm Will Be Fitted With Very Small Pumps With Flexible Pump Which Will Suck Water From Nearby Drain , Tank And Discharge Small Portion To Measuring Cell Fitted Inside Trolly Portable Type Oil Content Meter ( Purimeter ) Oil Content Meter Is A Microprocessor Based Equipment Used For Time To Time Or Continuously Measuring Oil Content In Water. A Representative Sample From The Pump / Source Is Passed Through The Purimeter Measuring Cell. The Cell Scans The Sample And The Meter Displays Its Oil Content Directly In Ppm.. The Purimeter Is Generally Used Directly On Line However, The Modified Versions Of Purimeter Can Be Used For Finding Out Oil Content In A Water Sample By Pouring The Same In Purimeter Cell/ Through Small Pumps . Measurement Principle The Measurement Is Based Upon The Principle That When Two Immiscible Liquids Are Mixed Together, One In Large Quantity And The Other, Comparatively In Minute Amount, (As Water And Oil In The Case Of Processed Oily Water) And If This Mixture Is Exposed To A Beam Of Light Energy, Then The Secondary Phase (Oil In This Case) Particles Will Scatter Part Of The Incident Light Energy. The Intensity Of This Scattered Energy Is Proportional To The Number Of Secondary Phase Particles. Over A Limited Range Of Concentration, The Graph Of Oil Concentration Vs Scattered Light Is A Straight Line. In `Purimeter' A Sample From Oily Water Separator Is Continuously Exposed To A Beam Of Light Energy. The Intensity Of Transmitted And Scattered Light Is Measured. In Order To Eliminate Effects Of Any Minute Variation In The Intensity Of Transmitted Energy, A Ratio Technique Is Adopted And The Resultant Output Is Amplified, Processed, Converted And Displayed In Terms Of Ppm Of Oil. Construction: The `Purimeter' Consists Of Measuring Cell And An Electronic Process And Display Cabinet. The Sampling Cell Is Made Out Of Non Ferrous Material, Suitably Coated To Prevent Corrosion. The Cell Can Be Either Mounted On The Cabinet Itself Or Near The Sampling Point, Away From The Cabinet. The Cabinet For The Purimeter Circuit And Controls Will Be Approved Flameproof Type And Will Be Suitable For Use In Oil Terminals. Unit Principle Is Employed In Electronic Circuitry. Various Circuits Are Made In The Form Of `Plug In' Cards. Most Of The Components Are Of Solid State Type Which Ensures Long Life And Reliable Operation. Operation Of Purimeter : Sample Flow From The Discharge Line Is Directed To The Cylindrical Glass Sample Cell And Subjected To The Beam Of Concentrated Light Energy. Two Photodetectors Forming A Matched Pair, Are Used To Measure The Intensity Of Direct And Scattered Light. The Angular Position Of The Light Transmitter And Photodetectors As Well As Their Fields Are So Chosen That Their Combination Makes Them Most Sensitive To Presence Of Oil Particles. This Arrangement Also Provides For Self Compensation To Fouling Of Glass Cell, Small Amount Of Turbidity, Voltage Variation, Colour Of Water And Its Temperature. The Sample Stream Enters The Cell At The Bottom And After Measurement, Leaves The Cell From The Top, And Is Led Back To Oily Water Tank. The Sample Flow Should Be Adjusted To Approximately 1 To 1.5 Ltrs/Min. The Measurements, Thus Taken By The Photodetectors, Are Processed In The Ratio Divider, Amplified, Further Processed And Finally Digitally Displayed In Terms Of Ppm, On The Display Window. The Instrument Is Factory Set To Measure Oil Content Upto Maximum 50 Ppm . Controls And Indications : The Purimeter Has The Following Controls : A) On Off Switch B) Normal / Calibration Mode Selector Switch. C) Thumb Wheel Switches For Setting Alarm Delay. D) Thumb Wheel Switches For Setting Alarm Level. E) Alarm Acknowledgement Switch. The Purimeter Has The Following Indications : A) Green Led For `Power On' B) Red Led For Instant Alarm C) Red Led For Delayed Alarm D) Two Digit Led Display For Displaying Oil Content. Scope Of Supply And Work : Our Scope Of Activity Includes Supply, Installation And Commissioning Of The Following : Portable Type Oil Content Meter . Sr. Description Qty. No. Nos. 1. Oil Content Meter Enclosure Flame Proof/Non Flame Proof. 1 No 2. Measuring Cell . 1 No 3. Small Pump 1 No. 4. Copper Tube Brass Adaptor 1 Set. 5. Trolly With Wheel 1 No Scope Of Work : 1.Supply, Installation And Commissioning Of Equipments Mentioned Above In ` 1 To 5. .
Refer Detail
Due Date : 07/12/2018
JHARKHAND
10 Tenders: 17303577 Supply Of Copper Tube Terminal Heavy Duty Bs 4579 Of Size 2.5 6.0Sqmm Dowels Cat.No.Cus 541 Of Three Phase Locomotives.
Refer Detail
Due Date : 07/12/2018
ANDHRA PRADESH
Show Page: 1 2 3 4 5 6 7 8 9 10 ...   Show:

Copper Tube Tenders

Tenders information of Copper Tube Tenders in India and Indian tenders for Copper Tube , Tender document For Copper Tube , Copper Tube tenders, Copper Tube Tender information, Live Tender for Copper Tube , Closed Tender for Copper Tube , Free Tender for Copper Tube , Free Full Tender Details for Copper Tube . Live Chat Available for tenders information.